 |
 |
|
| |
Integrated Pressured Solar Water Heater |
2008-5-21 22:35:38 |
Material
Vacuum tube Diamater: 47mm-1500mm, 58mm-1800mm 58mm-2100mm spacefilight vacuum heat collecting tube.
Material of inner tank: SUS304-2B stainless steel with 0.4mm thickness
Material of outer tank: SUS-2B stainless steel with 0.4mm thickness.
Copper coil: The diame
 View full description
|
|
|
Material
Vacuum tube Diamater: 47mm-1500mm, 58mm-1800mm 58mm-2100mm spacefilight vacuum heat collecting tube.
Material of inner tank: SUS304-2B stainless steel with 0.4mm thickness
Material of outer tank: SUS-2B stainless steel with 0.4mm thickness.
Copper coil: The diameter is 12mm, thickness is 1mm.
Heat preservation: Imported polyurethane foam with 55mm thickness.
Specification: 58mm*1800mm
Material of support: Stainless steel profiled bar with 1.2mm thickness orn galvanized steel plate wqith plastic spraying.
Principle
The water of the heat preservation water tank is just decalescence, heat accumulation and thermolysis the water of the water tnk is invariablenes.The vacuum tube collector absorbs the heat energy to heat the water in heat storage tank, when using the hot water, the cold water nflows through the inlet, the copper coil absorbs the heat then transfers into the cold water, so that the temperature rise up ceaseless, for the original features of the copper coil, the water temperature of the outlet is close to the water temperature of the wate tank(≤>3 degree).So the high pressure the cold water into the copper coil and absorbs the temperature, at last the water can be used.
|
|
|
|
 |
Features:
The system could be mounted on the southern roof of the villadom, on the courtyard lawn, or the southern slope of the construction. The hot water could be delivered to any floor without lim |
|
|
|
 |
Component:
This system is specially designed for household, villa and small area unit by our company. It consists of five parts such as flat panel, storage water tank, working station system (includ |
|
|
|
 |
Size of heat collection pipe:
φ47-1500、φ58-1800 Magnetic force aluminum and nitrogen splash absorb coat heat collection pipe, absorb heat quickly
Interio |
|
|
|
 |
Size of heat collection pipe:
φ47-1500、φ58-1800
Magnetic force aluminum and nitrogen splash absorb coat heat collection pipe, absorb heat quickly
Interior material |
|
|
|
 |
Size of heat collection pipe:
φ58-2000、φ58-2100 φ70-2000
Three high more cavity vacuum heat collection pipe，make heat drivingly
|
|
|
|
 |
Size of heat collection pipe:
φ47-2000、φ58-1800 φ58-2100
Absorb coat heat collection pipe, absorb heat quickly
I |
|
|
|
 |
Our tube is mainly assembled with heat-pipe, borosilicate glass tube, heat-collecting plates, metal cover, getter, heat exchanging end and aluminum safety-protection cap, etc. the magnetic-control spu |
|
|
|
 |
All glass vacuum tubes are the key component of solar collectors. The evacuated tube is similar to a conventional Dewar flask and consists of two borosilicate glass tubes, a glass with high chem |
|
|
|
 |
The heat pipes used in AUCKLAT solar collectors have a boiling point of only 25 degree.So when the heat pipe is heated above 25 degree the water vaporizes.This vapor rapidly rises to the top of the he |
|
|
|
 |
Features:
We produce and market solar water heaters, The products are far sold to America, France, Germany, Japan, Italy, India, Spain and HK and so on countries and regions.With the appealing desig |
|
|
