 |
 |
|
| |
CNC Lathe |
2008-5-25 23:18:34 |
Max. swing over bed: 400mm
Width of bed: 300mm
Max. length of workpiece: 750mm, 1000mm
Max. swing over slide: 200mm
X travel: 225mm
Z travel: 620mm, 870mm
Spindle nose: A2-5
Chuck size: 165mm
Taper of spindle bore: M5
Spindle bore: 40mm
Spindle speed: 200-3500rpm
Steps
 View full description
Website:http://www.mec.com.cn
Address:28/F, World Trade Center, 25 Tongxing Street, Dalian, Liaoning Province. China
Tel::86-411-39803333
Fax:86-411-39803301
|
|
|
Max. swing over bed: 400mm
Width of bed: 300mm
Max. length of workpiece: 750mm, 1000mm
Max. swing over slide: 200mm
X travel: 225mm
Z travel: 620mm, 870mm
Spindle nose: A2-5
Chuck size: 165mm
Taper of spindle bore: M5
Spindle bore: 40mm
Spindle speed: 200-3500rpm
Steps of spindle speed: stepless
Frequency conversion motor power: 5.5kw
X rapid traverse: 4m/min
Z rapid traverse: 5m/min
Repeatability of toolpost: 0.008mm
Vertical 4-position toolpost changing time: 2.4s
Horizontal 6-position toolpost changing time: 3.0s
Diameter of tailstock quill: 63m
Travel of tailstock quill: 130mm
Taper of tailstock quill: M4
Net weight: 1800kg, 1950kg
Overall dimensions: 2300x1480x1520mm, 2550x1480x1520mm
Main features:
*Construction casting molded with resin sand of bed, headstock, saddle, plinth, etc.
*Turcite-B coated on mating surfaces between saddle and guideways.
*Precision ballscrew, high rigidity precision compound bearings ensure accurate positioning
and efficient driving. Centralized oil lubricator providing forced automatic
lubrication onto ballscrew,
mating surfaces.
*High spindle speed with wide variable speed ranges. Low noise under 80dB. CKE-Z
series machine adopting the smart automatic gear changing mechanism enables automatic
speed changes among low, medium, high speed ranges without turning off the machine.
CKE-i series with independent spindle
structure and frequency converted motor or servo motor enables high spindle speed
and stepless spindle changing.
*Flexible control panel enables convenient tool setting.
*Popular full enclosed guards with interlock offer a waterproof and chip-free environment.
*Vertical 4-p toolpost, horizontal 6-p toolpost, etc are available for your selection.
*Optional pneumatic, hydraulic chuck and tailstock are available.
*FANUC, SIEMENS, FAGOR, etc control systems can be appointed. E-handwheel function
can also be equipped. |
|
|
|
 |
Max. swing over bed: 760mm
Max. swing over carriage: 540mm
Max. swing over gap: 965mm
Width of gap: 250mm
Max. length of workpiece: 1000/1500/2000/3000mm
Width of guideway: 394mm
Spindle nose: D |
|
|
|
 |
Max. swing over bed: 300mm
Width of bed: 205mm
Max. length of workpiece: 600mm
Max. swing over slide: 145mm
X travel: 190mm
Z travel: 550mm
Spindle nose: A2-5
Chuck size: 165mm
Taper of spindl |
|
|
|
 |
Features:
1) SIEMENS or FANUC control system
2) High precision ball lead screws driven by AC servo motors
3) Electric tool post with locking switch for sending locking signal
4) Tool post position |
|
|
|
 |
Max. swing over bed: 400mm
Max. swing over carriage: 230mm
Max. swing over gap: 700mm
Width of gap: 250mm
Max. length of workpiece: 1000/1500/2000/3000mm
Width of guideway: 394mm
Spindle nose: D |
|
|
|
